SKU
HI991003

Waterproof Portable pH/ORP/Temperature Meter with Sensor Check - HI991003

562,00 €
Na zalogi
Designed to bring simplicity to pH testing, the HI991003 pH/ORP Meter is designed specifically for use in manufacturing and environmental testing protocols. The specialized probe features a titanium body, integrated temperature sensor, and cloth junction.
  • ±0.02 pH accuracy; ±1 mV ORP accuracy
  • Comes with all the necessary solutions and batteries- everything you need to get started measuring right away.
  • Specialized for direct pH and ORP measurement.

 

Probe Condition

An on-screen indicator provides visual confirmation that your probe is working at its best.

Low Battery Indicator

The included batteries provide 1400 hours of continuous use. When the battery level is below 10%, a warning symbol will blink to indicate low battery condition. When low battery power may affect your results, the meter will shut down to avoid erroneous readings caused by low battery level.

Automatic Shut-off

The auto-off feature can be set to shut the meter off at 8 or 60 minutes, or it can be disabled so that the meter continuously stays on. The auto-off feature prolongs battery life for peace-of-mind and energy savings if the meter is accidentally left on.

 

 

Built to be Durable

Designed to withstand the knocks, drops, and spills of real life, the new IP67 body ensures top performance in any environment. These meters are protected against dust and water intrusion from any direction.

Portable Design

Made to fit comfortably in your hand for on-the-go testing, the multilevel LCD display provides at-a-glance readings of pH, ORP, and temperature from any angle and dual button operation streamlines the testing process for any user.

Quick Connect Probe

A Quick Connect DIN connector makes attaching and removing the probe simple and easy. The rubber coating protects the cable and provides a water-tight seal without twisting.

 

Your measurements require detailed attention; so should your electrode. The HI991003 Portable pH/ORP Meter features a replaceable HI12973 probe that has been carefully designed specifically for pH and ORP measurements encountered in a variety of manufacturing and environmental testing protocols.

 

Titanium Body

The titanium body protects your pH electrode from accidental breakage, making it ideal for measurements in plating baths. It also serves as a matching pin to reduce problems caused by electrical currents.

Platinum ORP Sensor

Provides the best response over a wide range of applications.

Cloth Junction

When readings appear sluggish, simply pull out some of the cloth material from out from its position t renew the junction with an uncontaminated, fresh surface

 

 

 

 

We believe that buying a meter should be simple. Your Portable pH Meter is equipped with everything you need for successful testing right out of the box.

 

General Electrode Cleaning Solution

Your Portable pH/ORP Meter comes with cleaning solution that has been engineered to keep your electrode free from debris and build up. This concentrated combination of detergents cleans your meter quickly and effectively so that your meter stays in optimum condition.

pH 4 & 7 Buffer Sachets

When performing a pH calibration it is important that the correct buffers are used. We include some start buffers to get you going. The single-use sachets are individually sealed so you use fresh buffer each time you calibrate. 

 

 

Specifications

 

pH Resolution

0.01 pH / 0.1 pH

pH Accuracy (@25°C/77°F)

±0.02 pH / ±0.1 pH

pH Calibration

Automatic, 1 or 2 point selectable buffer set Standard: 4.01; 7.01; 10.01 or NIST: 4.01; 6.86; 9.21

mV Range

±825 mV (pH-mV)

mV Resolution

4 mV

mV Accuracy

±1 mV (pH-mV)

Temperature Range

-5.0 to 105.0 °C/23.0 to 221.0 °F

Temperature Resolution

0.1 °C/0.1 °F

Temperature Accuracy (@25°C/77°F)

±0.5 °C up to 60 °C; ±1.0 °C outside ±1.0 °F up to 140 °F; ±2.0 °F outside

Temperature Compensation

Automatic -5.0 to 105.0 °C/23.0 to 221.0 °F

Power Supply

1.5V AAA batteries (3 pcs.)

Power Consumption

approx. 1400 hours of continuous use

Environment

0 to 50°C (32 to 122°F); RH max 100% RH max. 100%

Dimensions

s 154 x 63 x 30 mm (6.1 x 2.5 x 1.2”)

Weight

199 g (6.91 oz.) with batteries

Ordering Information

Each meter is supplied complete with: • HI12973 pH/ORP/temperature probe with titanium body and DIN connector with 1m (3.3’) cable • pH 4.01 & 7.01 Buffer sachet • HI700601 Electrode general cleaning solution (2 sachets) • 100 mL beaker (1 pcs.) • Alkaline batteries: 1.5V AAA (3 pcs.) • Rugged carrying case • Calibration certificate of meter • Calibration certificate of probe • Instruction manual

Vse cene so brez DDV in brez stroškov dostave, razen če ni to kako drugače določeno. Hanna Service d.o.o. — Sermin 75H, Bertoki — 6000 Koper (Slovenjia) — davčna številka: SI92346669 © 2024 Vse pravice pridržane