Refillable Combination pH Electrode for Non-Aqueous Titration

Name: Refillable Combination pH Electrode for Non-Aqueous Titration
SKU: HI1151B
Price: 391.00 EUR

391,00 €

Na zalogi

This specialized electrode is designed for use in non-aqueous titrations with organic electrolytes. The polypropylene cap offers high chemical resistance and the Santoprene internal seals that isolate the connection of the internal electrode indicating wire provide long-lasting durability against solvents. To further protect the internal portion of the pH electrode, a resin is used to reinforce the Santoprene seals.

Made with chemically resistant materials for long electrode life in harsh solvents.
High temperature glass body for use in the range of 0 to 100°C (32 to 212°F).
Ideal for for pH measurement in organics and non-aqueous titrations.

Preskoči na konec galerije slik

Preskoči na začetek galerije slik

Opis

The HI1151B uses high temperature (HT) glass, spherical bulb, glass body, single ceramic frit, double junction and is refillable with 3.5M KCl.

High-Temperature Glass Formulation

The measurement of pH at very high temperatures is detrimental to the sensitive glass bulb and will shorten the life of it. A pH electrode with general-purpose (GP) glass will have a resistance of 100 megaohms at 25^oC while the resistance of HT glass is around 400 megaohms at 25^oC. As the HI1151B is used at elevated temperatures the resistance decreases to approach the that of GP glass. The HI1151B is suitable to use with samples that measure from 0 to 100^oC.

Spherical Glass Tip

The spherical bulb is for general purpose use. Other tip shapes include conic for penetration and flat tip for surface measurements.

Glass Body

The glass body is ideal for laboratory use. The glass is resistant to many harsh chemicals and is easily cleaned. The glass body also allows for a fast transfer of heat to the internal reference electrolyte. The mV generated by the reference cell is temperature-dependent. The faster the electrode reaches equilibrium, the steadier the reference potential. The Santoprene internal seals isolate the connection of the internal electrode indicating wire provides long-lasting durability against solvents. To further protect the internal portion of the pH electrode, a resin is used to reinforce the Santoprene seals.

Single Ceramic Double Junction Reference

The HI1151B is a double junction design. pH electrodes are available as single junction or double junction. See below for a complete description of the differences. The junction also known as a salt bridge is a necessary component of the electrical circuit. The movement of ions must flow through the junction for a steady reading. The outer reference has a single ceramic frit. The ceramic is a porous material that is easily fused with the glass body and has a similar expansion coefficient. A single ceramic junction has a flow rate of 15-20 μL/hour. Other junction types are available with higher flow rates and made with different materials.

Refillable

The HI1151B is a refillable probe. Since it is a double junction pH electrode the fill solution is the HI7082 3.5M KCl. This solution does not contain any silver as with a single junction electrode. The absence of silver will prevent any silver precipitate from forming at the junction surface and clogging it. Clogging of the junction will result in drifty and erratic readings. The polypropylene cap offers high chemical resistance.

BNC Connector

The HI1151B uses a BNC connector. This type of connector is universal in that it can be used on any pH meter that has the female BNC probe input. Other types of connectors include DIN, screw type, T-type, and 3.5mm to name a few. These types of connectors tend to be proprietary for a particular type of meter and are not interchangeable.

Single Junction Versus Double Junction pH Electrodes

Conventional electrodes are normally single junction. As depicted by the figure above, these electrodes have only a single junction between the internal reference wire and the external solution. Under adverse conditions, such as high pressure, high temperature, highly acidic or alkaline solutions, the positive flow of the electrolyte through the junction is often reversed resulting in the ingress of sample solution into the reference compartment. If this is left unchecked, the reference electrode can become contaminated, leading to complete electrode failure. Another potential problem with single junction electrodes is the clogging of the junction due to silver chloride (AgCl) precipitation. Silver can be easily precipitate in samples that contain Tris buffer or heavy metals. When the electrolyte solution makes contact with the sample, some AgCl will precipitate on the external face of the junction. The result is drifty readings obtained from the sensor.

Hanna’s double junction system, as the name implies, has two junctions, only one of which is in contact with the sample as shown in the figure. Under adverse conditions, the same tendency of sample ingress is evident. However, as the reference electrode system is separated physically from the intermediate electrolyte area, the contamination of the electrode is minimized. The likelihood of clogging of the junction is also reduced with a double junction electrode since the outer reference cell uses a fill solution that is “silver-free”. Since there is no silver present, there is no precipitate that can form to clog the junction.

Specification

Specification Name	Detail
SKU	HI1151B
Description	refillable, combination pH electrode
Reference	double, Ag/AgCl
Junction / Flow Rate	ceramic, single / 15-20 µL/h
Electrolyte	–
Max Pressure	0.1 bar
Range	pH: 0 to 13
Recommended Operating Temperature	0 to 100°C (32 to 212°F) — HT
Tip / Shape	spheric (dia: 9.5 mm)
Temperature Sensor	no
Amplifier	no
Body Material	glass
Cable	coaxial; 1 m (3.3')
Recommended Use	non-aqueous titration
Connection	BNC