SKU
HI3619D

ORP Electrode with DIN Connector for General Laboratory - HI3619D

209,00 €
Na zalogi
The HI3619D is a glass body, refillable, single junction, digital ORP electrode with a DIN connector. This electrode has a single ceramic junction as part of the reference cell and a platinum ORP sensing pin.  This design consideration is ideal for general laboratory use and disinfection ORP measurements.
  • Platinum Pin
  • Single Ceramic Junction
  • Use for laboratory general purposes with HI98140, HI98150, HI98230, HI98240 pH meters

Hanna Instruments offers a wide variety of ORP electrodes that are designed for many different applications. The type of material used for the sensing pin, type of glass used for the body material, type of junction, type of reference and electrolyte used are just some of the design considerations. The HI3619D uses a platinum pin, glass body, single ceramic junction and is refillable with 3.5M KCl + AgCl.

 

Platinum Sensing Pin

The HI3619D ORP sensor is made with platinum. An ORP sensor must be chemically inert; it cannot be oxidized or reduced itself. It must also have the proper surface characteristics to promote rapid electron exchange, a property known as high exchange current density. Two noble metals have proven to work well for this purpose: pure platinum and pure gold are both used in the construction of ORP sensors. The platinum sensor is often preferred because it is mechanically simpler and safer to produce. Platinum can be welded to glass and has the same thermal coefficient. The platinum sensor signal is carried through the electrode body, and together with the reference signal is conducted to the measurement meter.

 

Glass Body

The glass body is ideal for laboratory use. The glass is resistant to many harsh chemicals and is easily cleaned. The glass body also allows for a fast transfer of heat to the internal reference electrolyte. The mV generated by the reference cell is temperature-dependent. The faster the equilibrium the steadier the reference potential.

 

Single Ceramic Junction

The outer junction of an electrode, also known as a salt bridge, is a necessary component of the electrical circuit. The movement of ions must flow through the junction for a steady reading. The outer reference has a single ceramic frit. The ceramic is a porous material that is easily fused with the glass body and has a similar expansion coefficient. A single ceramic junction has a flow rate of 15-20 μL/hour. Other junction types are available with higher flow rates and made with different materials.

 

Refillable

The HI3619D is a refillable probe. Since it is a single junction ORP electrode the fill solution is the HI7071 3.5M KCl + AgCl. If using a refillable ORP electrode, the fill cap should be removed prior to measurement. Removing the cap creates positive head pressure in the reference cell allowing for a higher flow rate of electrolyte through the outer junction. A higher flow rate will result in a faster and more stable reading.

 

DIN Connector

The HI3619D uses a DIN connector. This type of connector is generally proprietary to the meters they are supplied with and may not be interchangeable. Other types of connectors include BNC, screw type, T-type, and 3.5mm to name a few.

 

Specifications

 

Body Material

Glass

Reference

single, Ag/AgCl

Junction/Flow rate

ceramic, single / 15-20 µL/h

Electrolyte

3.5M KCl + AgCl

Range

ORP: ±2000 mV

Max. pressure

0.1 bar

Tip shape

platinum pin

Diameter

12 mm

Body Length / Overall Length

120 mm / 175.5 mm

Recommended Operating Temperature

20 to 40°C (68 to 104°F)

Temperature sensos

No

Matching Pin

No

Amplifier

Yes

Cable

7-pole; 1 m (3.3')

Connection

DIN

Applications

general purpose, laboratory general purpose, ORP titrations

Vse cene so brez DDV in brez stroškov dostave, razen če ni to kako drugače določeno. Hanna Service d.o.o. — Sermin 75H, Bertoki — 6000 Koper (Slovenjia) — davčna številka: SI92346669 © 2024 Vse pravice pridržane