Hydrogen Peroxide Reagent for Titratable Acidity in Water Mini Titrator - HI84530-60

Na zalogi

The HI84530-60 is a 30 mL bottle of hydrogen peroxide reagent that is used for samples on the HI84530 Titratable Acidity for Water Analysis. Water samples containing polyvalent cations (e.g., iron, aluminium, chromium, manganese, etc.) may react slowly with the titrant, causing a drifting endpoint. In sample such as this, it is necessary to add several drops of the HI84530-60 hydrogen peroxide reagent in order to increase the rate of hydrolysis of the metal ions present.

Pre-measured solution
Clearly marked expiration date and lot number
Air tight bottle with tamper-proof seal to ensure quality

Hydrogen Peroxide Reagent for Titratable Acidity in Water

The HI84530-60 is a 30 mL bottle of hydrogen peroxide solution that is used to treat water samples containing hydrolyzable salts or polyvalent cations (such as iron, aluminum, manganese, and chromium) to accurately determine acidity values.

The endpoint of an acid-base titration corresponds stoichiometrically to the complete neutralization of the acids present. Water acidity results from strong and weak acids as well as from the hydrolysis of salts. Due to these more complex mixtures, endpoints for water acidity are arbitrarily fixed on practical considerations. Unpolluted surface waters contain carbon dioxide as the main acidic component, and titration of these samples corresponds to the stoichiometric neutralization of carbonic acid with sodium hydroxide. The titration to pH 8.3 represents total acidity. The titration to pH 3.7 represents strong acidity from polluted water. If the samples are suspected to contain hydrolyzable salts or polyvalent cations (such as chromium, iron, manganese), it is necessary to pretreat the samples with HI84530-60 reagent. Replacement reagents required to operate the HI84530 include:

	Low Range - 15 to 400 mg/L as CaCO₃	High Range - 300 to 4000 mg/L as CaCO₃
Pump calibration standard	HI84530-55	HI84530-55
Titrant solution	HI84530-50	HI84530-51
Hydrogen peroxide reagent*	HI84530-60	HI84530-60

* Used with samples containing hydrolyzable salts or polyvalent cations (such as chromium, iron, manganese)