SKU
HI8936AN

Conductivity Transmitter to use with Four-ring Probe - HI8936

Na zalogi
HI8936 is a conductivity transmitter that utilizes a four-ring potentiometric probe. This probe is virtually immune to contamination by unclean solutions. This allows the transmitter to operate at peak performance at all times.
 
  • Automatic temperature compensation ensures fast, accurately compensated readings even during sudden temperature fluctuations.
  • Optional backlit, LCD display for easy viewing.

Easy Installation

The HI 8936 transmitter may be wall-mounted at any convenient location close to the measurement site. The HI8936 series should be used in conjunction with the HI7635 in-line probe or HI7638 platinum probe.

 

Automatic Temperature Compensation

Temperature effects are compensated for by utilizing both the built-in temperature sensor on the probe and the transmitter’s ATC circuitry with a of 2%/°C.

 

Optional LCD

HI8936”L” versions allow easy verification and monitoring of measured values and is easier to calibrate and maintain.

 

Direct Probe Connection

Direct connection of the probe to the transmitter assures a positive electrical connection with no signal loss over long distances.

 

Specifications

 

EC Range

HI8936A & AL: 0.0 to 199.9 mS/cm HI8936B & BL: 0.00 to 19.99 mS/cm HI8936C & CL: 0 to 1999 µS/cm HI8936D & DL: 0.0 to 199.9 µS/cm

Resolution

HI8936A & AL: 0.1 mS/cm HI8936B & BL: 0.01 mS/cm HI8936C & CL: 1 µS/cm HI8936D & DL: 0.1 µS/cm

Accuracy

±2% f.s. (excluding probe error)

Calibration

manual, two point, with offset and slope trimmers

Temperature Compensation

fixed or automatic from 0 to 50°C (32 to 122°F) with β=2%/°C

Probe

HI7635 for in-line applications (not included)

Recorder

Output 4-20 mA, not isolated, max 500 Ohm

Power Supply

without LCD: 12-30 VDC; with LCD: 17-36 VDC

Overtime adjustable

typically from 5 to approximately 30 minutes

Input Impedance

10¹² Ohm

Power Supply

BL981411-0: 12 VDC adapter (included); BL981411-1: 115/230 VAC; 50/60Hz

Environment

0 to 50°C (32 to 122°F); RH max 95% non-condensing IP Rating IP65

Dimensions

165 x 110 x 71 mm (6.5 x 4.3 x 2.8’’)

Weight

1 kg (2.2 lb.)

Ordering information

All HI8936 models are supplied complete with instructions.

Vse cene so brez DDV in brez stroškov dostave, razen če ni to kako drugače določeno. Hanna Service d.o.o. — Sermin 75H, Bertoki — 6000 Koper (Slovenjia) — davčna številka: SI92346669 © 2024 Vse pravice pridržane